SLV HV 1 Circuit 1-Phase Track Left Power supply Black

Left-hand initial power supply for single-rail lighting This initial power supply in a left-hand version is a necessary component when installing track lighting. It is suitable for single-rail lighting: that means you only need three wires from the ceiling to connect this rail light, so installation is not overly complex. Choose the right power supply An initial power supply is placed at the start of the track. This type of connection is suitable for track lighting that consists of one element, or if the track starts at the power point. Initial feeds consist of two versions: left and right. The left and right describes where the ground runs in the track. You will need a different connection piece, depending on whether it is on the left or right. With a straight track this does not matter, because you can turn the track around. If you are working with one or more corners or bends in the track, you will have to be careful to choose the right initial power supply.